Nmcli connection modify la. vpn.data 'ca = /tmp/la./you/ca.crt, key = /tmp/you.key, dev = tun, cert = /tmp/you.crt, cert-pass-flags = 1, comp-lzo = adaptive, remote = la.:1194, connection-type = tls'Īfterwards you can control vpn with GUI or use following commands: Never-default should not use remote gateway as default route Sudo nmcli connection modify la. ipv4.never-default yes Sudo nmcli connection modify la. ipv4.dns-search Sudo nmcli connection modify la. ipv4.dns 172.16.27.1 Ifname - is the required by default, but does not affect anything Sudo nmcli connection add type vpn vpn-type openvpn con-name la. ifname. But in my case you can control your VPN connection both with command line and GUI. There is another useful commands to setup what you need via command line. If you pass all your traffic through your OpenVPN server you should not need to worry about your ISP blocking public DNS servers anymore since as far as your ISP is concerned you are only generating traffic to your VPS unless the VPS is behind the same ISP.

Is this a primary DNS server or a caching DNS server? Are you trying to query local resources or internet resources? Does it work as expected if you do not push your DNS server to the client? If this does not work then you have to look back at the DNS configuration again. I know dig is more in fashion these days but I know nslookup better.Ĭanonical name = Name: Address: 74.125.225.52 You say that the 'it appears to work.' How did you verify this? Are you basing it on the fact the server started without any errors or did you actually perform some queries against it?įirst thing I would do is use nslookup or dig to connect to the unbound server and perform some queries. What can be wrong here? How can I solve this problem? However, after restarting openvpn, I see that my client can still connect to the OpenVPN server but no pages can be rendered anymore. I just put push 'dhcp-option DNS 11.22.33.44' Key /etc/openvpn/easy-rsa/2.0/keys/server.keyĭh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pemĪs it is suggested here, I tried to use my server's IPs (say 11.22.33.44). # Notice: here I set the listening port to be 80 to avoid possible port blockageĬert /etc/openvpn/easy-rsa/2.0/keys/server.crt I need to use the DNS server instead of public DNS servers because some ISPs have blocked public DNS IPs. I have defined an unbound DNS server on my VPS and it appears to work.

How to make my own vpn server mac